2.5" Gland Kit (1.5" Shaft)
Koyker OEM Cylinder Part 663317
2 1/2” Cylinder Gland Kit with Packing works with certain Koyker front-end loaders. Completely assembled OEM 2 1/2” Cylinder Gland with all seals.
NOTE: This product does not qualify for returns. Confirm correct gland and packing kit by comparing pictures, checking owner's manual AND by measuring the inside diameter of the current gland.
This kit includes the following pieces:
Part Number: K663317 (Assembled)
- (1) 2 1/2” Aluminum Gland
- (1) 2 1/2” Gland “O” Ring
- (1) 2 1/2” Backup Ring
- (1) 1 1/2” U-Cup Seal
- (1) 1 1/2” Rod Wiper
- (1) 1" Lock Nut
Koyker Loader 220 (Loader may also utilize 2.25" Cylinder Gland Kit)
Koyker Loader 235
Koyker Loader 245
Koyker Loader 310
Koyker Loader 315
Koyker Loader 345
Koyker Loader 385
Legend Loader 542
Legend Loader 640 (Loader may also use 3.25" Cylinder Gland Kit)
This product does not qualify for returns. Please make sure this product is the correct size and will work for your equipment before purchasing.
Your equipment may consist of NON-OEM parts and may not coincide with product manuals. If you have questions or concerns, please contact our Koyker Customer Service Team at 1-800-456-1107.
INSPECTION AND MAINTENANCE:
Periodically check all hydraulic system connections to insure a leak-free condition. Also, be certain to maintain proper fluid levels in the tractor hydraulic system as in accordance with the method and frequency recommended in the tractor operator’s manual. Use only hydraulic fluids recommended for your tractor hydraulic system by the manufacturer.
Keep hydraulic system clean. Be certain to maintain recommended oil filter service intervals. All internal surfaces of the hydraulic system on your loader have been factory cleaned, inspected, and plugged with protective caps prior to shipment. Be certain all protective caps are securely in place until hydraulic system assembly is completed.
Care must be taken with your loader cylinders. Nicks, scratches, rust or other shaft damage can cause seal damage resulting in cylinder leakage and poor performance.
Read these service tips before beginning assembly of cylinder gland or piston.
- Keep seals clean from the time they are removed from package until they are installed.
- Clean the groove or bore into which the seal is to be fitted before installing the seal.
- Never touch the seal lip in handling. Always pick up the seal by its outer member.
- Inspect each seal lip carefully for nicks, scratches, and dirt at time of installation. If dirty, use a soft, clean cloth and carefully wipe off seal. DO NOT wipe seal with fingers as this only imbeds dirt in the seal.
Never clean rubber related seals with a mineral based solvent! Clean rubber seals in denatured alcohol or non-mineral based solvents only.
Seals can be made more pliable and easier to install, if first heated in hydraulic oil to 160 degrees F. Never use direct heat on any seals.
We distribute products through local dealerships in your area. Prices and product availability may vary between dealerships.
Verdant Garden Beds:
Galvanized steel raised garden beds can be found on Amazon.
We try our best to ship orders in the timeliest manner possible. Each product may have a different level of manufacturing demand and timeframe for shipment.
If you have any questions or concerns about your order's status, please email us at email@example.com to discuss.
We offer calculated shipping rates during the checkout process. USPS and UPS options are available if the product ordered qualifies for those options.
International orders that equal 20 lbs. and less are charged a flat rate of $48.00. Orders that are 20.1 lbs. and over are charged a calculated shipping rate during the checkout process.
Business Days: Monday-Thursday.
Holidays, Fridays, Saturdays and Sundays are not included in processing days.
NOTE: All product specifications are subject to change or improvement without notice. We reserve the right to change product pricing at any time without further notice. Pricing may differ at the time of purchase.
Contact Sioux Steel by emailing firstname.lastname@example.org or by calling our customer service specialists at 1-800-557-4689 for additional information.
We Also Recommend
QUESTIONS & ANSWERSAsk a Question
Torque value for 21/2” cylinder piston lock nut? The shaft is 1.5”.
Thank you for reaching out. We do not have a standard for the piston nut, only to tighten until snug. Over tightening will damage the nut. For further assistance, please connect with our Koyker customer service team at email@example.com for by calling 1-800-456-1107.