2.25" Cylinder Seal Kit (1.25" Shaft)
Koyker OEM Cylinder Part 672933
2 1/4" Cylinder Packing Seal Kit works with certain Koyker front-end loaders. Complete kit with all seals needed to service (1) 2 1/4” cylinder.
NOTE: This product does not qualify for returns. Confirm correct seal kit by comparing pictures, checking owner's manual AND by measuring the inside diameter of the barrel cylinder tube and chrome shaft rod weldment.
This kit includes the following pieces:
Part Number: K672933
- (1) 2 1/4" Gland "O" Ring
- (1) 2 1/4" Backup Ring
- (1) 1 1/4" U-Cup Rod Seal
- (1) 1 1/4" Rod Wiper
- (2) 2 1/4" U-Cup Piston Seals
- (1) 3/4" Rod "O" Ring
- (1) 3/4" Lock Nut
This product does not qualify for returns. Please make sure this product is the correct size and will work for your equipment before purchasing.
Your equipment may consist of NON-OEM parts and may not coincide with product manuals. If you have questions or concerns, please contact our Koyker Customer Service Team at 1-800-456-1107.
INSPECTION AND MAINTENANCE:
Periodically check all hydraulic system connections to insure a leak-free condition. Also, be certain to maintain proper fluid levels in the tractor hydraulic system as in accordance with the method and frequency recommended in the tractor operator’s manual. Use only hydraulic fluids recommended for your tractor hydraulic system by the manufacturer.
Keep hydraulic system clean. Be certain to maintain recommended oil filter service intervals. All internal surfaces of the hydraulic system on your loader have been factory cleaned, inspected, and plugged with protective caps prior to shipment. Be certain all protective caps are securely in place until hydraulic system assembly is completed.
Care must be taken with your loader cylinders. Nicks, scratches, rust or other shaft damage can cause seal damage resulting in cylinder leakage and poor performance.
Read these service tips before beginning assembly of cylinder gland or piston.
- Keep seals clean from the time they are removed from package until they are installed.
- Clean the groove or bore into which the seal is to be fitted before installing the seal.
- Never touch the seal lip in handling. Always pick up the seal by its outer member.
- Inspect each seal lip carefully for nicks, scratches, and dirt at time of installation. If dirty, use a soft, clean cloth and carefully wipe off seal. DO NOT wipe seal with fingers as this only imbeds dirt in the seal.
Never clean rubber related seals with a mineral based solvent! Clean rubber seals in denatured alcohol or non-mineral based solvents only.
Seals can be made more pliable and easier to install, if first heated in hydraulic oil to 160 degrees F. Never use direct heat on any seals.
We distribute products through local dealerships in your area. Prices and product availability may vary between dealerships.
Verdant Garden Beds:
Galvanized steel raised garden beds can be found on Amazon.
We try our best to ship orders in the timeliest manner possible. Each product may have a different level of manufacturing demand and timeframe for shipment.
If you have any questions or concerns about your order's status, please email us at email@example.com to discuss.
Within the contiguous 48 US States, orders that equal 20 lbs. and less are charged a flat rate of $8.00. Orders that are 20.1 lbs. and over OR are oversized are charged a calculated shipping rate during the checkout process.
International orders that equal 20 lbs. and less are charged a flat rate of $48.00. Orders that are 20.1 lbs. and over are charged a calculated shipping rate during the checkout process.
Business Days: Monday-Thursday.
Holidays, Fridays, Saturdays and Sundays are not included in processing days.
NOTE: All product specifications are subject to change or improvement without notice. We reserve the right to change product pricing at any time without further notice. Pricing may differ at the time of purchase.
Contact Sioux Steel by emailing firstname.lastname@example.org or by calling our customer service specialists at 1-800-557-4689 for additional information.
We Also Recommend
QUESTIONS & ANSWERSAsk a Question
the outside diameter of my cylinders is 2 3/8 and shaft size is 1 1/4. is the 2 1/4 still the correct size to order? this is for a 110 loader I think about 15 years old.
Thank you for your question!
The 110 loader is a discontinued model and originally was manufactured with a 1 3/4" cylinder. (110 Loader Manual) It sounds like the cylinders may have been changed throughout the years. We would be happy to assist further by looking at a picture of the current cylinder to see if it is a Koyker manufactured item. Please email us at email@example.com at your earliest convenience.